PGZ Series Vacuum Plate Drier

(1) Description Feeding material into Vacuum Plate Drier, because boiling point of material will fall under the state of vacuum and along with the rake turning over continuously, the surface of material will be changed continuously. Therefore it speeds up drying rate greatly. The wet air will be drew out by vacuum pump. This equipment is mainly used for drying heat sensitive material, toxic material and the material that easy to oxidize or needs to recover solvent. (2) Features Under the state of vacuum, the machine can keep material to feed and discharge continuously. Closed operation,PGZ Series Vacuum Plate Drieris particularly suitable for drying material that has toxicity or easy to oxidize. It is very convenient to recover organic solvent in wet gas. Low energy consumption, high efficiency, safe and convenient, material is not easy to be polluted. Technical parameters: type Diameter mm High mm Area of dry m2 Power kw type Diameter mm High mm Area of dry m2 Power kw 1200/4 1850 2608 3.3 1.1 2200/18 2900 5782 55.4 5.5 1200/6 3028 4.9 2200/20 6202 61.6 1200/8 3448 6.6 1.5 2200/22 6622 67.7 7.5 1200/10 3868 8.2 2200/24 7042 73.9 1200/12 4288 9.9 2200/26 7462 80.0 2200/6 2900 3262 18.5 3.0 3000/8 3800 4050 48 11 2200/8 3682 24.6 3000/10 4650 60 2200/10 4102 30.8 3000/12 5250 72 2200/12 4522 36.9 3000/14 5850 84 2200/14 4942 43.1 3000/16 6450 96 2200/16 5362 49.3 3000/18 7050 108